Introduction To Slitter Machine

The slitting machine is mainly used to cut the large drum master coil into products of different widths, and can check the product quality. Its main features are as follows:
1. Unwinding photoelectric deviation correction, high accuracy; The control mode is divided into two gears: manual gear and automatic gear
2. There are two winding methods: surface winding and center winding;
3. Automatic tension control is adopted for winding and unwinding tension; The control methods include tension feedback control and taper control.
4. Two kinds of cutting tools, round knife cutting and air knife cutting, are reliable in quality and easy to adjust;
5. The surface center coiling is adopted, and the coiling quality is uniform and stable;
6. Automatic stop of fixed length and automatic meter of length;
7. It has a trimming device, and the leftovers are discharged by the fan;
8. It is suitable for cutting narrow band (insulating material, mica tape, film, etc.) of various thin coiled materials
2： Applicable scope of the machine:
1. Applicable substrate: mica tape, paper, insulating material and film slitting
2. Applicable industries: industries related to various insulating materials, special electrical paper and film
3. Applicable process: distribution, finished product inspection, finished product separation, process opening
3： Main technical parameters:
1. Machine speed (maximum): 150 m/min
4. Maximum diameter of unwinding material Φ 600- Φ one thousand and six hundred
5. Maximum winding diameter: Φ 500- Φ one thousand and two hundred
6. Minimum cutting width 6mm
7. Cutting accuracy ± 0.1mm
8. Total power 10KW
9. Weight~3500KG
The intellectualization of the slitter is reflected in three aspects:
1. Intelligentization of process expert function
2. Intelligent operation expert function
3. After-sales service expert function.